PIE 535 4-20/ 10-50 mA Dual Range Loop Calibrator

Features: - True ± 0.025% of reading - Read and Source 0.000 to 50.000 mA - Display current or -25.00 to 125.00% of 4-20mA or 10-50mA - Bar graph displays % of 4-20mA or 10-50 mA - Read 0.00 to 60.00 volts with 2X over range ability - Simulate 2-Wire Transmitters - Power 2-Wire Transmitters and Read 0.000-50.000mA - Read 0.00 to ± 30.00 VDC with 4X over range ability - Source 0.000 to 24.000 VDC with up to 20mA output - Direct Calibration 1.000V to 5.000V - Loop Compliance Voltage e 43 Volts - Optional Analog Output for chart recorders & Data loggers - Auto Step or Ramp with HIGH accuracy and repeatability designed in collaboration with Nuclear plants - Selectable step sizes, time in-between steps & soak time - Stop watch like EZ-Check™ switch - Full 5 Digit Display - Fuseless protection from accidental connection to 240 volts AC/ DC - Rugged handheld enclosure with optional lanyard and Velcro hand strap - Uses 4 AA alkaline batteries - Superior battery life of 40 hours under typical continuous usage - Easy access to battery compartment The Practical Instrument Electronics ( PIE) 535 brings you the features of the original Model 532 for 10-50 milliamp process loops. On power up you can select either 4-20 or 10– 50mA on the PIECAL 535. The EZ-Dial knob and EZ-Check switch are all that' s needed to make quick adjustments or set 0% or 100% of full scale. The EZ-Step button provides one-handed stepping. Automatic stepping and ramping modes allow hands-free testing and calibration of the process loop with HIGH accuracy and repeatability designed in collaboration with Nuclear plants. The PIE 535 offers the optional analog output of 10mV/ mA proportional output for connection to chart recorders and data loggers.